Multi Battery Adaptor Kit

Model: NPA-MQZ1K
RM 2,068.00
1

1. Prices indicated refer to Suggested Retail Price and may change from time to time without prior notice.

  • Highlight

    Dimensions (W × H × D): Approx. 123.4 x 67.8 x 66.2 mm (4 7/8 x 2 3/4 x 2 5/8 inches)

    Weight: Approx. 400 g (14.2 oz) ( Not including battery )

  • Features
    Two NP-FZ100 batteries are included in the kit

    Two NP-FZ100 batteries are included in the kit

    For extended shooting

    For extended shooting

    This battery adaptor can load four NP-FZ100 Z-series batteries and supports extended shooting.

    Supply power to a camera compatible with Z- or W-series battery

    Supply power to a camera compatible with Z- or W-series battery

    This Multi Battery Adaptor Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.

    Quickly charges NP-FZ100 batteries

    Quickly charges NP-FZ100 batteries

    This battery adaptor can quickly charge up to four NP-FZ100 Z-series batteries via AC adaptor within about 480 minutes. Power charge condition is indicated in a 3-level LED when the “remaining battery power” check button is pressed.

    Select power supply or battery charge

    Select power supply or battery charge

    DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.

    Equipped with two USB ports for power output

    Equipped with two USB ports for power output

    Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.

    Setting flexibility for varied shooting scenes

    Setting flexibility for varied shooting scenes

    This battery adaptor provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.

    Turn into a more compact size

    Turn into a more compact size

    If you remove battery protector and put battery port covers into place, Multi Battery Adaptor turns into a smaller easy-to-carry adaptor for two batteries.

    Compatibility information

     

    Go to Support page

  • Support
  • highlight
    • Highlight

      Dimensions (W × H × D): Approx. 123.4 x 67.8 x 66.2 mm (4 7/8 x 2 3/4 x 2 5/8 inches)

      Weight: Approx. 400 g (14.2 oz) ( Not including battery )

  • Reviews
    • Reviews
  • features
    • Features
      Two NP-FZ100 batteries are included in the kit

      Two NP-FZ100 batteries are included in the kit

      For extended shooting

      For extended shooting

      This battery adaptor can load four NP-FZ100 Z-series batteries and supports extended shooting.

      Supply power to a camera compatible with Z- or W-series battery

      Supply power to a camera compatible with Z- or W-series battery

      This Multi Battery Adaptor Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.

      Quickly charges NP-FZ100 batteries

      Quickly charges NP-FZ100 batteries

      This battery adaptor can quickly charge up to four NP-FZ100 Z-series batteries via AC adaptor within about 480 minutes. Power charge condition is indicated in a 3-level LED when the “remaining battery power” check button is pressed.

      Select power supply or battery charge

      Select power supply or battery charge

      DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.

      Equipped with two USB ports for power output

      Equipped with two USB ports for power output

      Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.

      Setting flexibility for varied shooting scenes

      Setting flexibility for varied shooting scenes

      This battery adaptor provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.

      Turn into a more compact size

      Turn into a more compact size

      If you remove battery protector and put battery port covers into place, Multi Battery Adaptor turns into a smaller easy-to-carry adaptor for two batteries.

      Compatibility information

       

      Go to Support page

  • Support